Safety Equipment For Mold Inspection At Your Home

What is the safety equipment for mold inspection you’ll need

A lot of people phone Dryfast because we offer a free mold inspection. It will tell you the exact work needed to be carried out on your home. Although a free mold inspection usually leads to us carrying out the work, under certain circumstances you might prefer to do everything yourself. We would never recommend anyone go near toxic black mold. If you only have a small patch of normal mold there is one big thing stopping you from removing it on your own. You will need the right safety equipment for mold inspection, so we’ll go through everything you need in case you decide to go it alone.

Wear A Dust Filter Mask

Dryfast have the best equipment for mold inspection and remediation in the business. We’re certainly not suggesting you go out and spend tons of money on a respirator you’ll use once. That doesn’t mean to say all the mold spores floating into your mouth when you disturb a contaminated surface is a good thing.

So at the very least you’ll be expected to wear a dust filter mask as a minimum requirement. If we’ve carried out the free mold inspection and told you it’s not catastrophic, you shouldn’t need anything more advanced to breathe through.

Free Mold Inspection
The safety equipment for mold inspection you’ll need if you can carry out the mold removal process on your own.

A Pair Of Safety Goggles

I don’t know if you can remember those annoying goggles you had to slip on while carrying out experiments in science class. You’ll need to get yourself a pair of them. Much like the reason you will be wearing a dust filter mask. You don’t want any mold spores making their way into your eyes.

Toxic black mold will cause a great deal of damage to your vision while it’s growing inside your home. After your free mold inspection you’ll know you are not dealing with that. So simple safety goggles will be enough to save your eyes from any damage.

Cover Your Bare Hands With Gloves

It’s staggering how many people do everything they can to protect their face from mold. But when it comes to their hands they think they are bulletproof. If you’re going to be working near any kind of mold, even if it’s not toxic, you don’t want it to come into contact with your skin.

It’s still not healthy for the body, and who knows how many open wounds you might end up with while ripping parts of your home apart. You also shouldn’t forget it would be easy to accidentally stick your contaminated bare hands somewhere they don’t belong.

equipment for mold inspection

Gear Up In A Full Suit

The mold remediation process is a messy job. No matter how small the problem might be we’re always geared up in protective suits. All you need is something cheap enough to dispose of correctly once you’re done. It will save you from having to throw a perfectly good set of clothes away.

Removing mold is a dirty job. You’re kidding yourself if you think you can clean up an area of your home without ending up covered in it. Even if you go back to what we discussed earlier, mold spores will still always find their way onto whatever you’re wearing.

Completely Seal Off Your Room

This isn’t a piece of equipment for mold inspection you will wear, but it’s the most basic thing in the world and can stop the mold from spreading throughout your home after it’s been stirred up. All you need is a large plastic sheet you can pick up in practically any DIY store you walk into.

Combine it with your trusty roll of duct tape. Even though your room won’t be vacuum sealed, it will be good enough to lock the mold inside with you. That might sound intimidating, but it shouldn’t be a problem if you wear all the protective equipment we’ve talked about.

Wet Everything With Water First

If we think you’ll be able to deal with the problem during the free mold inspection, you might hear us tell you to spray water over all your surfaces before you remove any mold. I know it grows with the help of moisture so that information doesn’t sound right. Keep in mind it’s the best way in the world to stop the spread of spores when you’re cleaning up. If the mold is bone dry there is a greater chance it’s going to end up all over you once you begin the removal process.

Avatar for Georgio Atana

As a General Contractor specialized in Restoration Environmental and Reconstruction, my professional goal is to keep up with the ever-changing rules, regulations, and laws in the restoration industry. I continue to strive to make the property recovery process a positive and good experience for each client.


Leave a Reply