Water damage can occur when you least expect it. Whether it is a pin leak in your pipe, leaky roofs or leaking plumbing from your toilet, water damage weakens your home’s foundation, eventually causing severe structural damage.
Fortunately, there are many ways to protect yourself from costly water losses. Here are the various ways to prevent water damage:
Locate your water main
Knowing where the main water valve in your home is and how to shut it is paramount. In fact, this could be the only thing that can save you from a major water damage loss. If one of the pipes in your home ruptures, the first thing you ought to do is to stop the flowing water, which will potentially minimize the subsequent damage.
Check what you plant and where you plant it. For example, thriving shrubs can be aesthetically pleasing. However, some trees and plants such as the weeping willows have very invasive roots. And if you are not careful where you plant them, they can grow right in your drainage field, septic tank, or the sprinkler system.
Before planting anything near your home, take the time to research whether their roots may cause a problem as they grow. Also, consider removing trees and shrubs that have become too big.
Clean out your roof gutters and downspouts
Clean the gutters and the downspouts regularly to avoid blockage and ice dams. Safely climb up to your roof to check for leaves, sticks, bird’s nests and whatnot. If you do not see any of these items, it could mean that all the dirt and debris is stuck in your gutters.
During the rainy days, a clogged gutter can cause water to spill into your home’s basement, foundation or through the roof, which can cause some severe water damage. Make sure your gutters are all properly cleaned. If they are placed too high, consider hiring a professional to clean them for your safety.
Keep a close eye on your monthly water bill
Most homes have their water pipes hidden in the floors or behind walls. This makes it hard for homeowners to detect a leak until the water damage occurs. One of the best ways to detect a leak in your home is by checking your regular water bill. If you begin to get water bills that are abnormally high, it could be a sign that there is a leak somewhere in your home.
Avoid unclogging chemicals
Regardless of how clean you are, clogs are bound to happen from time to time. Chances are that in such cases, you’d opt to go for the strongest chemical drain cleaners. As much as these chemicals may be convenient, they also tend to eat away at your pipes and may not be too healthy for you either.
Using powerful chemicals to unclog your drains often sets you up for leaks. That is why a drain snake is highly recommended for clearing away clogs. Drain snake clogs are relatively inexpensive and can be found at any local hardware store. They cut through the clogs without damaging your pipes or irritating your eyes and skin.
Do not pour grease down the drain
Whether you intend to flush it with cold or hot water, never pour grease down your sink. The oil may solidify and stick to your pipes causing blockage and eventually, water damage. The safest way of getting rid of grease is by pouring it in an empty tin, give it some time to settle and then throw it in the trash.
During the cold winter months, standing water in a hose may freeze, creating an ice block, which may stop your water from flowing easily. This may cause your pipes to burst, creating damage to floors, walls, and foundation. Make sure you disconnect and drain your garden hose.
Install water detection devices
Water detection devices are crucial to preventing water damage in your household. These are small electronic devices that sound an alarm whenever its sensors come in contact with moisture. The accessories are highly recommended since they can detect low moisture levels or leaks that often go unnoticed.
You can install your detection gadget near sump pumps, water heaters, dishwashers, toilets and washing machine to prevent mold growth and extensive water damage.
Test your sump pump
Make sure to have your sump pump tested on a regular basis to make sure the check valve is working correctly, and that the water is being forced out of the sump pit to prevent it from flowing back into your home’s basement.
An easy way to check this is by dumping some water into the sump pit. The added water will prompt the check valve to start working and kick it in to begin propelling out water. If you think your sump pipe could be faulty, call a licensed plumber to check and fix it for you.
Fix water leaks
Failing to repair and fix water leaks immediately may lead to further damage to your floors and walls. In the long run, these leaks may lead to the growth of mold and mildew.
Do not ignore any minor leaks in your home as they could make you pay for repairs that could have been avoided. If you notice any stains on the ceiling, dark spots under pipes, or drips in your toilet, take immediate action to prevent water damage as these are some of the signs of leaks.
Check faucets, caulking, and hoses
Conduct regular inspections of your sinks, tub faucets and hoses leading to washing machines, dishwashers, water heaters and ice makers for any leaks or cracks. If you find them to be faulty, repair or replace them immediately. Additionally, ensure that the caulking around your showers and tubs are tightly sealed to prevent water seeping into your floors and walls.
Inspect and repair your roof
Take the time to have your roof inspected early before the snow starts falling. Preferably during the first month of autumn. Replace any broken tiles and have the loose ones adequately fixed to prevent roof leaks and severe water damage in the coming months.
Following these prevention tips will go a long way in preventing water damage in your home. However, if water leaks in your home despite your efforts, do not hesitate to contact a licensed and qualified water damage restoration company.